top of page

What is a SolarEdge monitoring transfer, and why does it matter?

1 hour ago
4 min read

Short answer: every SolarEdge system sits on SolarEdge's monitoring platform as a "site", and an installer account administers it. The administrator gets the alerts, the panel-by-panel detail and the controls over who can see what. A monitoring transfer moves those administration rights from the old installer to a new one, with the owner's permission. It matters because when the old installer is gone, nobody is watching the alerts. For newer equipment, SolarEdge's warranty also requires the system to stay connected to its monitoring platform.


Your installer may be gone while the mySolarEdge app still shows production. What's missing is someone who gets the alerts and acts on them.


What does "site ownership" mean in SolarEdge Monitoring?


Two different things get called "ownership":


  • You own the equipment. The panels, optimizers and inverter are yours.

  • An installer account administers the site. The installer that registered the site usually administers it.


The administrator invites the owner and sets how much the owner can see. When an installer closes, you still own the equipment, but the administration rights stay in their account.


What do you see, and what does the installer see?


You, with typical owner access:


  • Production, and consumption if your system measures it

  • The panel layout, only if your installer gave you that level


The administering installer:


  • Alerts. SolarEdge's monitoring tools send real-time notifications when a problem arises at a site.

  • Panel-level detail. The Layout view shows each panel with its power optimizer's readings, and pinpoints the parts that triggered an alert.

  • Access control. Under Admin, then Site Access, the administrator adds users and sets their access level.

  • A route to SolarEdge support. In-depth analysis runs through a case in SolarEdge's Service Center.


Firmware is SolarEdge's job: its warranty says it updates products remotely through the monitoring connection.


Why does it matter for your warranty?


SolarEdge's current Limited Product Warranty (effective April 15, 2026) makes a continuous connection to the SolarEdge Monitoring platform one of its conditions. It also says SolarEdge must be able to monitor and update the product remotely, and that a product left disconnected, beyond a temporary outage, can lose warranty coverage. Read the warranty for your own equipment, or ask us to check it.


  • This version applies to products bought on or after April 15, 2026. Older equipment follows the warranty in effect when it was bought, so we check by serial number.

  • The same warranty can pass from the buyer to a later owner, and nothing in it ties coverage to the original installer.


A transfer doesn't create the connection; your inverter does. But someone has to notice when it drops: the administrator.


How does a monitoring transfer work?


SolarEdge describes the process in general terms:


  1. You give permission. A new installer asks you, the owner, to approve moving the site's administration to them.

  2. The request goes to SolarEdge. SolarEdge has a site-transfer request for moving administration to a new installer, for a change of ownership and for adding users. Having your Site ID ready speeds it up.

  3. The new installer handles it. SolarEdge's homeowner FAQ says that when you switch, your new installer handles the change. Ask us about any SolarEdge fee before anything is submitted.


Afterwards, the new installer sets your access level and reviews the system.


What should you have ready?


  • The email on your mySolarEdge account. Never your password. Nobody needs it for a transfer.

  • Your Site ID, if you know it. It's in the mySolarEdge app under site details.

  • Photos of the inverter label. Model and serial number, straight on and readable.

  • Did you buy the house with the solar already on it? Tell us. That's a change of ownership too, and the same SolarEdge form covers it.


What changes after a transfer, and what doesn't?


What changes:


  • The new installer administers the site, and the alerts go to them.

  • They decide who else can see the site, and at what level.

  • The old installer no longer holds the administration rights.


What doesn't change:


  • You own the equipment, and the warranty isn't tied to who installed it.

  • Nothing on the roof is touched.


Your app login: after a transfer we check that your login still works and that you can see your system.


Why does monitoring "go dark", and what should you check first?


SolarEdge's homeowner FAQ says it's usually not the app; it's communication. Check these first:


  1. Log in on the web too. If the app and the website both show no data, the system isn't communicating.

  2. Check "Last Updated" on the site details page.

  3. Look at the inverter. Don't open it. Note what its screen or status lights show, and send us a photo.

  4. Check the router. Is it on and online? Was it replaced, or its Wi-Fi password changed? Wired (ethernet) and Wi-Fi connections both depend on it.

  5. Cellular? SolarEdge says plans generally expire about five years after installation. Ask us about renewal before you pay for anything.

  6. Never seen data, or the inverter isn't communicating? That's a job for an installer.


Harvey Woods LLC takes on systems other companies installed. We handle the transfer, file manufacturer warranty claims for owners, and our repairs carry a 10-year workmanship warranty.


Monitoring gone quiet, with no installer to call? Book a Discovery Call or ring (603) 793-4201. It's 30 minutes on the phone, and you'll know whether a transfer is your next step.



FAQ


Do I have to give the new installer my password?


No. A transfer needs the email on your account and, ideally, your Site ID. Never share your password.


Will I lose access to the mySolarEdge app?


After a transfer, the new installer sets your access, and we confirm your login works.


Does a transfer fix monitoring that has gone offline?


No. A transfer changes who administers the site. A communication loss is usually Wi-Fi, a router change or an expired cellular plan, and needs its own fix.


Does SolarEdge charge for a transfer?


Ask us about any SolarEdge fee before anything is submitted.


Sources



Last reviewed: 17 November 2026. Next review: 17 May 2027.


Recent Posts

See All

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page